Adhesive Pads 1 mm 3 Pack

Description

The Number Plate Fixers – 1mm
Adhesive Spacer Pads are for direct surface mounting on flat surface only.
Ensure you clean all wax and dirt from mounting surface and reverse side
of number plate. Ensure the mounting surface is flat if not select 6mm
spacer pad which will absorb minor surface differences. Apply three pads
to the reverse side of plate in the positions shown on the back of
packaging. Remove protective film from pads and press plate into position.
Apply firm pressure for about ten seconds to ensure a good bond. Full
bonding strength is reached after 24 hour and the minimum application
temperature is 10c.

Specification:

• For direct surface
  mounting on flat surfaces only
  
  
• Clean all wax & dirt from
  fixing area
  
  
• Apply 3 pads in position
  to reverse of number plate & remove protective film
  
  
• Minimum application
  temperature is 10ºc
  
  
• Apply firm pressure for 10
  seconds to ensure good bond, full bonding strength reached after 24
  hours

Please Note: This product is
bulk packed to bring you the best deal, no pretty packaging sorry!

Additional information